DC Handgewindebohrer G DIN 5157 Typ N210-3 HSSE Fertigschneider Nr 3
-
- 562170410
- Handgewindebohrer
- HSSE
- unbeschichtet
- DIN 5157
- DC SWISS
- N210-3
Anwendungsgruppen:
31 Grauguss < 850 N/mm2
62 Messing, Bronze, Rotguss (kurzspanend) < 700 N/mm2
74 Al legiert Si > 10 %, Mg-Legierung < 400 N/mm2
31 Grauguss < 850 N/mm2
62 Messing, Bronze, Rotguss (kurzspanend) < 700 N/mm2
74 Al legiert Si > 10 %, Mg-Legierung < 400 N/mm2
| d1 | P TPI | Ø d1 mm | PK (ST) | Katalogpreis in CHF per 1 ST | |||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | |||||||||
| G 1/16" | 28 | 7.72 | 1 | 51.15 | |||||
| G 1/8" | 28 | 9.72 | 1 | 33.50 | |||||
| G 1/4" | 19 | 13.15 | 1 | 43.90 | |||||
| G 3/8" | 19 | 16.66 | 1 | 54.90 | |||||
| G 1/2" | 14 | 20.95 | 1 | 78.00 | |||||
| G 5/8" | 14 | 22.91 | 1 | 93.55 | |||||
| G 3/4" | 14 | 26.44 | 1 | 116.65 | |||||
| G 7/8" | 14 | 30.20 | 1 | 164.00 | |||||
| G 1" | 11 | 33.24 | 1 | 188.25 | |||||
| G 1 1/8" | 11 | 37.89 | 1 | 283.00 | |||||
| G 1 1/4" | 11 | 41.91 | 1 | 322.25 | |||||
| G 1 3/8" | 11 | 44.32 | 1 | 388.10 | |||||
| G 1 1/2" | 11 | 47.80 | 1 | 418.10 | |||||
| G 1 3/4" | 11 | 53.74 | 1 | 511.65 | |||||
| G 2" | 11 | 59.61 | 1 | 613.30 | |||||
| G 2 1/2" | 11 | 75.18 | 1 | 1'196.60 | |||||
| G 3 | 11 | 87.88 | 1 | 1'547.70 | |||||
